Installation of Devices in the Fieldline Product Range

AUTOMATIONWORX
User Manual
FLS FLM SYS INST UM E
Order No.: 2698973
Installation of Devices in the Fieldline Product
RangeAUTOMATIONWORX
User Manual
Installation of Devices in the Fieldline Product Range
09/2007
Designation: FLS FLM SYS INST UM E
Revision: 04
Order No.: 2698973
This user manual is valid for:
Devices of the Fieldline product range connected to different bus systems
6651_en_04 PHOENIX CONTACTFLS FLM SYS INST UM E
Please Observe the Following Notes
In order to ensure the safe use of the product described, we recommend that you read this
manual carefully. The following notes provide information on how to use this manual.
User Group of This Manual
The use of products described in this manual is oriented exclusively to qualified electricians
or persons instructed by them, who are familiar with applicable standards and other regu-
lations regarding electrical engineering and, in particular, the relevant safety concepts.
Phoenix Contact accepts no liability for erroneous handling or damage to products from
Phoenix Contact or third-party products resulting from disregard of information contained
in this manual.
Explanation of Symbols Used
The attention symbol refers to an operating procedure which, if not carefully followed,
could result in damage to hardware and software or personal injury.
The note symbol informs you of conditions that must be strictly observed to achieve er-
ror-free operation. It also gives you tips and advice on the efficient use of hardware and
on software optimization to save you extra work.
The text symbol refers to detailed sources of information (manuals, data sheets, litera-
ture, etc.) on the subject matter, product, etc. This text also provides helpful information
for the orientation in the manual.
For use in potentially explosive environments, please observe the following:
– THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A,
B, C AND D OR NON-HAZARDOUS LOCATIONS ONLY.
– WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY
IMPAIR SUITABILITY FOR CLASS I, DIVISION 2.
– WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT
UNLESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE
NON-HAZARDOUS.
– ALL WIRING OF THESE DEVICES MUST BE IN ACCORDANCE WITH THE
NATIONAL ELECTRICAL CODE ARTICLE 501.4(B) FOR CLASSI, DIVISION 2.
6651_en_04 PHOENIX CONTACTFLS FLM SYS INST UM E
We Are Interested in Your Opinion
We are constantly striving to improve the quality of our manuals.
Should you have any suggestions or recommendations for improvement of the contents
and layout of our manuals, please send us your comments.
PHOENIX CONTACT GmbH & Co. KG
Documentation Services
32823 Blomberg
Germany
Phone +49 - 52 35 - 30 0
Fax + 49 - 52 35 - 34 20 21
E-mail tecdoc@phoenixcontact.com
General Terms and Conditions of Use for Technical Documentation
Phoenix Contact GmbH & Co. KG reserves the right to alter, correct, and/or improve the
technical documentation and the products described in the technical documentation at its
own discretion and without giving prior notice, insofar as this is reasonable for the user.
The same applies to any technical changes that serve the purpose of technical progress.
The receipt of technical documentation (in particular data sheets, installation instructions,
manuals, etc.) does not constitute any further duty on the part of
PhoenixContactGmbH&Co.KG to furnish information on alterations to products and/or
technical documentation. Any other agreement shall only apply if expressly confirmed in
writing by PhoenixContact GmbH & Co. KG.
Please note that the supplied documentation is product-specific documentation only and
that you are responsible for checking the suitability and intended use of the products in
your specific application, in particular with regard to observing the applicable standards
and regulations.
Although Phoenix Contact GmbH & Co. KG makes every effort to ensure that the informa-
tion content is accurate, up-to-date, and state-of-the-art, technical inaccuracies and/or
printing errors in the information cannot be ruled out. PhoenixContactGmbH&Co.KG
does not offer any guarantees as to the reliability, accuracy or completeness of the infor-
mation.
All information made available in the technical data is supplied without any accompanying
guarantee, whether expressly mentioned, implied or tacitly assumed. This information
does not include any guarantees regarding quality, does not describe any fair marketable
quality, and does not make any claims as to quality guarantees or guarantees regarding
the suitability for a special purpose.
PhoenixContactGmbH& Co. KG accepts no liability or responsibility for errors or omis-
sions in the content of the technical documentation (in particular data sheets, installation
instructions, manuals, etc.).
The aforementioned limitations of liability and exemptions from liability do not apply, in so
far as liability must be assumed, e.g.,according to product liability law, in cases of premed-
itation, gross negligence, on account of loss of life, physical injury or damage to health or
on account of the violation of important contractual obligations. Claims for damages for the
violation of important contractual obligations are, however, limited to contract-typical, pre-
dictable damages, provided there is no premeditation or gross negligence, or that liability
is assumed on account of loss of life, physical injury or damage to health. This ruling does
not imply a change in the burden of proof to the detriment of the user.
PHOENIX CONTACT 6651_en_04FLS FLM SYS INST UM E
Statement of Legal Authority
This manual, including all illustrations contained herein, is copyright protected. Use of this
manual by any third party is forbidden. Reproduction, translation, and public disclosure, as
well as electronic and photographic archiving or alteration requires the express written con-
sent ofPhoenixContact. Violators are liable for damages.
Phoenix Contact reserves all rights in the case of patent award or listing of a registered
design. Third-party products are always named without reference to patent rights. The
existence of such rights shall not be excluded.

Title: Installation of Devices in the Fieldline Product Range Explanation & Description: At our electrical industry, when referring to "Installation of Devices in the Fieldline Product Range," we are discussing the process of setting up and integrating various electrical equipment and components from our specifically designed Fieldline product line. The Fieldline product range comprises a collection of high-quality, standardized, and tailored devices intended for diverse applications in power distribution, automation, and control systems. This might include items like power transformers, circuit breakers, fuses, relays, switchgear, motor starters, or other energy management solutions. During installation, our products follow strict guidelines and best practices to ensure compatibility, safety, and optimal performance. This could involve site preparation, device mounting, wiring and cabling, connection to the electrical grid, testing, commissioning, and any necessary configuration according to the user's requirements and local regulations. If you need assistance with installing a specific device or have questions about the installation process, please provide more details about the device(s) in question, your project specifications, and any challenges you may be facing, and our expert team will be glad to guide you through the installation procedure.