CS-3000支撐系統

Support system CS-3000
Flexible, easy to assemble, ergonomicalNew flexibility in operation and observation:
the Bernstein CS-3000
Inthe main, system constructors demand from modern support Thanks to the particular ease of assembly of the CS-3000, the
systems variability in the system's configuration, an advanced design amount of assembly work is also reduced, which for the system
and absolute ease of assembly. Bernstein is setting new standards constructor means great time savings and cost reductions:
here with the new CS-3000: A modern industrial design, well
thought-through ergonomics and many combinable components ?In addition to the non-positive connection of the tube fastening
create an innovative system solution on the modular principle. screws: Sixfold positive connection via component contour in the
tube's attachment area (the otherwise optional additional safety
?Long service life and safe operation thanks to anodised aluminium hole for overhead mounting is not required/photo 2)
tubes ?One person can install the complete system
?No more dirty edges, thanks to smooth transitions between the ?Stepless adjustment for system alignment by means of the tube
tube and other components (very easy to clean/photo 1) fastening screws
?Coated tube fastening screws for sealing the thread holes and for ?Readjustment is possible at any time without disassembling the
secure screw connections complete system (photo 3)
?Filigree appearance and connection of narrow profiles thanks to ?Cable and assembly openings at all deflection points in the system
the possibility of reducing the cross section from the square to the ?Tubes machined at one end so that you can cut them to the
round tube required length (machining templates supplied)
?Modular upgrading of the couplings is possible (also subsequently), ?Different tube lengths offer the possibility of variability in assembly
e.g. with adapter for narrow housing or angle adapter ?Adjustable torque (stiffness) of all rotating components (rough
?Protection IP 65 adjustment), fine adjustment with clamping lever or screw
?Well thought-through ergonomics for simple and virtually fatigue-
free operation
?An ideal solution from a single source for Bernstein control housing
Flie?ende überg?nge durch intelligentes Design Zus?tzlicher 6-facher Formschluss durch Kompo- Jederzeit, problemlose Nachjustage m?glich – ohne
bieten hohe Reinigungsfreundlichkeit nentenkontur im Aufsteckbereich des Rohres Demontage des Komplettsystems
Application example, support system CS-3000
The numerous modules and components of
the CS-3000 allow a flexible system assembly.
Even the most angled channels on systems
and machines can be created. This versatility
is unique on the market!
2Angle Intermediate joint
Coupling
Load diagramTop joint
Tube cross sections
Materials
?Anodised aluminium tubes
?Die-cast aluminium components
?Polyamide covers for assembly opening
?POM bearing
?Neoprene seals
Colours
?Support system components: anthracite grey/RAL 7016
?Connecting tubes: silver (natural) anodisedCoupling Art. No. 101.5300.001
Rotary angle 300°with stop.
(The adapter 101.5300.011 is required
for connection to profiles <120 mm)
Angle coupling Art. No. 101.5300.002
rotary angle 300°with stop,
assembly opening incl.
screw-fit plastic cover
Tilting coupling 15°A/B A=Art. No. 101.5300.013
Rotary angle 300°with stop,
fixed incline of 15°
Variant A inclined back
Variant B inclined forward
B=Art. No. 101.5300.014
Tilting angle coupling 15°A/B A=Art. No. 101.5300.015
Rotary angle 300°with stop,
fixed incline of 15°, assembly opening
incl. screw-fit plastic cover
Variant A inclined back
Variant B inclined forward
B=Art. No. 101.5300.016
Stand coupling Art. No. 101.5300.017
Rotary angle 300°with stop
Inclined stand coupling A=Art. No. 101.5300.018
15°A/B
rotary angle 300°with stop,
fixed incline of 15°
Variant A inclined back
Variant B inclined forward
B=Art. No. 101.5300.019
Dimensioned drawings and installation instructions
6 can be easily downloaded from: www.bernstein.euCoupling 48 Art. No. 101.3050.000
Rotary angle 300°with stop, only
compatible with the 48 mm round tube,
the adapter 980.652.000 is required for
connecting to the 80 mm profile
Angle reduced RD 48 Art. No. 101.5300.020
Reducing angle from the square tube
to the 48 mm round tube
Angle Art. No. 101.5300.008
with assembly opening incl.
screw-fit plastic cover
Rotary angle Art. No. 101.5300.009
Rotary angle 300°with stop,
assembly opening incl.
screw-fit plastic cover
Incline adapter (stepless 30°) Art. No. 101.5300.012
May only be used in conjunction
with couplings, stepless incline
adjustable up to 30°,
not compatible with 101.305.000,
max. load-bearing capacity 300 N
Adapter (narrow profile) Art. No. 101.5300.011
May only be used in conjunction
with couplings.

CS-3000（Control System - 3000）是 Honeywell （霍尼韋爾）公司推出的一款高端、成熟的集散控制系統（DCS, Distributed Control System），它專為過程工業設計，提供了全面的控制和監控解決方案。該支撐系統通常包括一系列功能強大的控制器、人機界面站（HMI）、工程師工作站（ESD/PLC）、通信網絡以及高級應用軟件模塊，這些組件協同工作以實現對生產過程的高效自動化管理。 在CS-3000系統中，控制器可能采用冗余配置，如Single Point of Operation (SPO) 或 Redundant Control Module (RCM)，確保了高可用性和數據安全性。HMI 屏幕提供實時的工藝參數顯示、操作員界面以及報警信息處理，而ESD/PLC則支持邏輯控制與順序控制，實現了對復雜生產流程的精確控制。此外，其開放的以太網通訊協議允許與其他系統無縫集成，并通過 Advanced Process Management (APM) 等高級應用軟件實現更深層次的過程優化和分析。 總之，CS-3000支撐系統是一種高度集成、功能完善的工業自動化解決方案，廣泛應用于石油、化工、能源、制藥等多個領域的重要生產裝置中。