T1H-EBC模塊
聲明:您必須遵守我們的協議,如果您下載了該資源行為將被視為對《電天下賬號管理規范》全部內容的認可,本網站資源來自原創,僅供用于學習和交流,請勿用于商業用途。如有侵權、不妥之處,請舉報本資源,我們將及時審核處理!
T1H-EBC模塊
T1H-EBC模塊
文本預覽
Value & Technology
T1 -EBC
H
技術資料目 錄
前言..................................................................................................................................................1
第一章 基于以太網的控制模塊介紹...................................................................................2
第二章 安裝和設置...............................................................................................................4
2-1 安裝以太網控制模塊...............................................................................................4
2-2 設置節點地址...........................................................................................................5
2-2-1 設置節點地址的幾種方法...............................................................................5
2-2-2 使用旋轉開關設定節點地址...........................................................................5
2-2-3 使用軟件工具設定節點地址...........................................................................5
2-3 10BaseT/100BaseT網絡電纜...................................................................................6
2-3-1 10BaseT/100BaseT連接...................................................................................6
2-3-2 串行端口(RS-232).......................................................................................7
2-4 10BaseT/100BaseT電纜最大連接長度...................................................................7
2-5 T1H-EBC規格..........................................................................................................8
2-6 T1H-EBC100規格...................................................................................................9
2-7 LED指示燈和熱插拔I/O模塊................................................................................10
2-7-1 熱插拔前檢查外部24VDC接線...................................................................11
2-7-2 熱插拔模塊的更換.........................................................................................11
2-8 以太網標準.............................................................................................................12
第三章 使用NetEdit3設定T1H-EBC(100)...................................................................13
3-1 NetEdit3軟件.........................................................................................................13
3-1-1 安裝NetEdit3..................................................................................................13
3-1-2 運行NetEdit3..................................................................................................14
3-1-3 NetEdit3畫面.................................................................................................15
3-1-4 為支持NetEdit3添加網絡協議.....................................................................15
3-2 使用NetEdit3..........................................................................................................16
3-2-1 以太網通訊協議.............................................................................................16
3-2-2 以太網地址.....................................................................................................17
3-2-3 模塊類型、IP地址、ID.................................................................................17
3-2-4 Module Info>General Information..................................................................17
3-2-5 Module Info>Ethernet Stats............................................................................18
3-2-6 EBC Settings...................................................................................................18
3-2-7 EBC Settings>Configuration>General............................................................18
3-2-8 EBC Settings>Configuration>Serial Port.......................................................19
3-2-9 EBC Settings>Utils>Show Base Contents......................................................19
3-2-10 EBC Settings>Firmware.................................................................................20
3-2-11 File菜單>Live Update....................................................................................21
3-2-12 F/B/C欄...........................................................................................................21
3-3 查找MAC地址標簽................................................................................................22
3-3-1 MAC地址........................................................................................................22
第四章 T1H-EBC100的MODBUS TCP/IP協議...............................................................23
4-1 MODBUS TCP/IP...................................................................................................23
4-1-1 客戶端/服務器模型........................................................................................23
14-1-2 協議描述.........................................................................................................23
4-2 支持的MODBUS功能代碼....................................................................................24
4-3 MODBUS 584/984 地址........................................................................................25
4-4 T1H-EBC100系統存儲器.....................................................................................26
4-5 當前/最后狀態錯誤代碼........................................................................................29
4-6 擴展錯誤代碼.........................................................................................................30
4-7 模擬量輸入模塊設定.............................................................................................31
4-8 模擬量輸出模塊設定.............................................................................................31
第五章 T1H-EBC100 DHCP和HTML設置.......................................................................32
5-1 T1H-EBC100 DHCP...............................................................................................32
5-1-1 DHCP..............................................................................................................32
5-2 不使用DHCP分配一個靜態IP地址.......................................................................33
5-3 使用HTML設置.....................................................................................................33
5-3-1 連接到T1H-EBC100......................................................................................33
附錄A 使用帶Think & Do的T1H-EBC(100)...............................................................36
A-1 T1H-EBC(100)I/O點.........................................................................................36
A-1-1 運行ConnectivityCenter工具..........................................................................36
A-1-2 連接到EBC.....................................................................................................36
A-1-3 分配I/O點給數據項.......................................................................................37
A-2 熱插撥設定.............................................................................................................37
A-2-1 熱插撥:自動方式.........................................................................................37
A-2-2 熱插撥:手動方式復位.................................................................................37
A-3 模擬量I/O模塊設置...............................................................................................38
A-4 I/O模塊狀態字/位..................................................................................................40
A-5 使用帶RJ-12串口的EZTouch/EZText觸摸屏.......................................................40
A-5-1 添加操作接口設備.........................................................................................40
A-5-2 使用監視I/O檢查觸摸屏運行........................................................................42
附錄B 使用帶KEPDirect OPC服務器的T1H-EBC(100)............................................43
B-1 KEPDirect介紹.......................................................................................................43
B-1-1 OPC技術.........................................................................................................43
B-1-2 DDE支持........................................................................................................43
B-1-3 KEPDirect.......................................................................................................44
B-2 KEPDirect工程:添加和設置一個通道...............................................................45
B-2-1 運行服務器.....................................................................................................45
B-2-1 添加一個通道.................................................................................................45
B-2-2 選擇設備驅動器.............................................................................................46
B-2-3 選擇網卡.........................................................................................................46
B-2-4 設置服務器寫出最優化.................................................................................47
B-2-5 保存新通道設定.............................................................................................47
B-2-6 在一個工程中使用多個通道.........................................................................48
B-3 KEPDirect工程:添加和設置一個設備...............................................................48
B-3-1 添加一個設備.................................................................................................48
B-3-2 選擇設備模塊.................................................................................................48
B-3-3 選擇設備ID....................................................................................................49
2B-3-4 設置設備超時屬性.........................................................................................49
B-3-5 Automatic OPC變量數據庫...........................................................................50
B-3-6 保存新設備設置.............................................................................................51
B-4 KEPDirect工程:向工程添加變量.......................................................................51
B-4-1 用戶自定義變量.............................................................................................52
B-4-2 建立一個用戶自定義變量.............................................................................53
B-5 T1H-EBC(100)I/O 地址...................................................................................55
B-5-1 T1H-EBC(100)I/O地址例子.....................................................................55
B-6 模擬量輸出模塊設置.............................................................................................56
附錄C 使用KEPDirect OPC Quick Client.........................................................................58
T1 -EBC
H
技術資料目 錄
前言..................................................................................................................................................1
第一章 基于以太網的控制模塊介紹...................................................................................2
第二章 安裝和設置...............................................................................................................4
2-1 安裝以太網控制模塊...............................................................................................4
2-2 設置節點地址...........................................................................................................5
2-2-1 設置節點地址的幾種方法...............................................................................5
2-2-2 使用旋轉開關設定節點地址...........................................................................5
2-2-3 使用軟件工具設定節點地址...........................................................................5
2-3 10BaseT/100BaseT網絡電纜...................................................................................6
2-3-1 10BaseT/100BaseT連接...................................................................................6
2-3-2 串行端口(RS-232).......................................................................................7
2-4 10BaseT/100BaseT電纜最大連接長度...................................................................7
2-5 T1H-EBC規格..........................................................................................................8
2-6 T1H-EBC100規格...................................................................................................9
2-7 LED指示燈和熱插拔I/O模塊................................................................................10
2-7-1 熱插拔前檢查外部24VDC接線...................................................................11
2-7-2 熱插拔模塊的更換.........................................................................................11
2-8 以太網標準.............................................................................................................12
第三章 使用NetEdit3設定T1H-EBC(100)...................................................................13
3-1 NetEdit3軟件.........................................................................................................13
3-1-1 安裝NetEdit3..................................................................................................13
3-1-2 運行NetEdit3..................................................................................................14
3-1-3 NetEdit3畫面.................................................................................................15
3-1-4 為支持NetEdit3添加網絡協議.....................................................................15
3-2 使用NetEdit3..........................................................................................................16
3-2-1 以太網通訊協議.............................................................................................16
3-2-2 以太網地址.....................................................................................................17
3-2-3 模塊類型、IP地址、ID.................................................................................17
3-2-4 Module Info>General Information..................................................................17
3-2-5 Module Info>Ethernet Stats............................................................................18
3-2-6 EBC Settings...................................................................................................18
3-2-7 EBC Settings>Configuration>General............................................................18
3-2-8 EBC Settings>Configuration>Serial Port.......................................................19
3-2-9 EBC Settings>Utils>Show Base Contents......................................................19
3-2-10 EBC Settings>Firmware.................................................................................20
3-2-11 File菜單>Live Update....................................................................................21
3-2-12 F/B/C欄...........................................................................................................21
3-3 查找MAC地址標簽................................................................................................22
3-3-1 MAC地址........................................................................................................22
第四章 T1H-EBC100的MODBUS TCP/IP協議...............................................................23
4-1 MODBUS TCP/IP...................................................................................................23
4-1-1 客戶端/服務器模型........................................................................................23
14-1-2 協議描述.........................................................................................................23
4-2 支持的MODBUS功能代碼....................................................................................24
4-3 MODBUS 584/984 地址........................................................................................25
4-4 T1H-EBC100系統存儲器.....................................................................................26
4-5 當前/最后狀態錯誤代碼........................................................................................29
4-6 擴展錯誤代碼.........................................................................................................30
4-7 模擬量輸入模塊設定.............................................................................................31
4-8 模擬量輸出模塊設定.............................................................................................31
第五章 T1H-EBC100 DHCP和HTML設置.......................................................................32
5-1 T1H-EBC100 DHCP...............................................................................................32
5-1-1 DHCP..............................................................................................................32
5-2 不使用DHCP分配一個靜態IP地址.......................................................................33
5-3 使用HTML設置.....................................................................................................33
5-3-1 連接到T1H-EBC100......................................................................................33
附錄A 使用帶Think & Do的T1H-EBC(100)...............................................................36
A-1 T1H-EBC(100)I/O點.........................................................................................36
A-1-1 運行ConnectivityCenter工具..........................................................................36
A-1-2 連接到EBC.....................................................................................................36
A-1-3 分配I/O點給數據項.......................................................................................37
A-2 熱插撥設定.............................................................................................................37
A-2-1 熱插撥:自動方式.........................................................................................37
A-2-2 熱插撥:手動方式復位.................................................................................37
A-3 模擬量I/O模塊設置...............................................................................................38
A-4 I/O模塊狀態字/位..................................................................................................40
A-5 使用帶RJ-12串口的EZTouch/EZText觸摸屏.......................................................40
A-5-1 添加操作接口設備.........................................................................................40
A-5-2 使用監視I/O檢查觸摸屏運行........................................................................42
附錄B 使用帶KEPDirect OPC服務器的T1H-EBC(100)............................................43
B-1 KEPDirect介紹.......................................................................................................43
B-1-1 OPC技術.........................................................................................................43
B-1-2 DDE支持........................................................................................................43
B-1-3 KEPDirect.......................................................................................................44
B-2 KEPDirect工程:添加和設置一個通道...............................................................45
B-2-1 運行服務器.....................................................................................................45
B-2-1 添加一個通道.................................................................................................45
B-2-2 選擇設備驅動器.............................................................................................46
B-2-3 選擇網卡.........................................................................................................46
B-2-4 設置服務器寫出最優化.................................................................................47
B-2-5 保存新通道設定.............................................................................................47
B-2-6 在一個工程中使用多個通道.........................................................................48
B-3 KEPDirect工程:添加和設置一個設備...............................................................48
B-3-1 添加一個設備.................................................................................................48
B-3-2 選擇設備模塊.................................................................................................48
B-3-3 選擇設備ID....................................................................................................49
2B-3-4 設置設備超時屬性.........................................................................................49
B-3-5 Automatic OPC變量數據庫...........................................................................50
B-3-6 保存新設備設置.............................................................................................51
B-4 KEPDirect工程:向工程添加變量.......................................................................51
B-4-1 用戶自定義變量.............................................................................................52
B-4-2 建立一個用戶自定義變量.............................................................................53
B-5 T1H-EBC(100)I/O 地址...................................................................................55
B-5-1 T1H-EBC(100)I/O地址例子.....................................................................55
B-6 模擬量輸出模塊設置.............................................................................................56
附錄C 使用KEPDirect OPC Quick Client.........................................................................58
AIGC
T1H-EBC模塊通常指的是車輛電子控制領域中的一種特定組件,其中"T1H"可能是某種車型或系統代號,“EBC”代表Electronic Brake Control,即電子制動控制系統。這種模塊負責收集、處理和執行與車輛防抱死制動系統(ABS)、電子制動力分配系統(EBD)以及車輛動態穩定控制系統(如ESP)相關的信號,通過對各車輪制動力的精確計算和調節,以確保在各種駕駛條件下提供最佳的行車安全性和操控穩定性。因此,T1H-EBC模塊是現代汽車電控系統中的核心組成部分之一。具體的應用細節和技術參數可能會因不同的汽車制造商和型號而有所差異。
T1H-EBC模塊的相關資源推薦
會員專享
升級會員獲取海量資源免費下載
會員免費下載
5D幣 購買
上傳資源賺收益
格式:pdf
瀏覽:740
收藏:0
瀏覽:740??|??
收藏:0
上傳時間:2008-11-21
大?。?span style="color: #444444;" data-v-e8a566e0>12.7MB
舉報
排名
昵稱
瓦特值